Pages

Thursday, September 5, 2013

Upcycle a Thrifted Chair for Under $10!

After buying our daughter a desk for her room, we realized she was going to need a chair. I guess the thought didn't occur to me until the desk was in her room that there needed to be a chair! So being me, I said I would find her a cute chair or fix one up. The search began, it took a while but I finally stumbled on this beauty at the thrift store for 5 bucks!

It wasn't wobbly, stained or smelly! I felt that it needed a paint job and new fabric for the seat and it would be great!
I had the paint at home and the brushes. All I needed to buy was some cute fabric that coordinates with my daughter's room. I found some great fabric at the local craft store and was able to use a coupon so the fabric only cost me $4.30. My total expense was $9.30! Sweet! This is a great project to try if you have never painted or tried to upcycle furniture.
This is simple explanation of what I did to upcycle this Thrifted chair:
 
Supplies:
Chair
Paint
Fabric
Paint brush and/or roller
Sanding block
Screwdriver
Wet rag possibly with soap.
Hammer and Tacks or Staple Gun

  • Lightly sand the chair with a sanding block. You don't need to go crazy with this step. Just "rough up the finish a bit.

  • Wipe down the chair with a wet rag. (You may need some soapy water) Then, dry it with a towel or let it air dry.

  • Remove the "seat". Use a screwdriver to remove the screws that secure the seat. Take out the seat and set it aside.



















  • Paint the chair. It took me 3 coats to cover the chair the way I liked. I used a brush and a small roller but you can do it however you like. I also gave each coat about an hour to dry before applying the next coat.

  • Cover the seat cushion. Lay the fabric facing down. Place the cushion facing down in the center of the fabric. Starting with one side fold the fabric over the cushion and tack it down. You can use a hammer and some tacks, as I did, or a staple gun if you have one.  Do the same on the opposite side making sure to pull the fabric snug.

 
  • Fold over the other sides. The other sides will be folded over kind of like you would wrap a present. Make sure that the fabric does not bunch up and then secure them in place.




  • Reattach the seat cushion. Once the paint is completely dry, put the seat cushion back onto the chair using the original screws.

And that is it! Now enjoy that new upcycled chair!



 



No comments:

Post a Comment